My Cart

Items:  items

Aico Carbon Monoxide Detector

Aico Carbon Monoxide Detector Alarm
Aico Carbon Monoxide Detector Alarm
Mains powered 230v with Lithium battery back-up

Aico Carbon Monoxide Detector

58.44 Each
(48.70 Ex VAT at 20%)

CORONA VIRUS - Websparky is closed until further notice

Estimated delivery on this item from: 3.30
Final delivery charges are affected by quantities chosen and delivery service selected.
Estimated price above assumes "2nd class delivery" service selected.
Product Ref: EI261ENRC

Additional Information:
Aico Carbon Monoxide Detector Alarm
Mains powered 230v with Lithium battery back-up

Model Ei261ENRC
• Proven Electrochemical sensor
• Tamper proof rechargeable Lithium battery back-up
• Unique easy to replace sensor module
• Memory feature records if Carbon Monoxide (CO) has been detected
• Easy to use Test/Hush button
• Easi-fit base
• Pre alarm LED gives early warning of CO
• Loud distinctive alarm sound (85db(A) at 3 meters)
• Power, alarm and fault indicator lights
• Kitemarked to BS EN50291:2001

Product Description
• The Ei261ENRC is a Carbon Monoxide (CO) alarm powered by 230V AC mains. The rechargeable Lithium cell back-up is designed to have a ten-year life and outlast the life of the CO alarm. They will provide at least 30 days of operation without mains power.

• The Ei261ENRC has a high performance electrochemical sensor to sense CO presence. The sensor can be replaced after 5 years to
provide a combined 10 year protection against CO.

• The Ei261ENRC can be interconnected with any combination of Ei Electronics mains powered alarms and ancillaries (up to 20 units).

• The Ei261ENRC also has Remote Control capability, allowing the alarm to be controlled remotely from a Remote Control Switch (Ei1529RC). This allows remote Test, Locate and Silence functions to be performed on all RC enabled alarms in the system. A Manual Call Point (MCP401RC) is also available.

• The Ei261ENRC is supplied with an Easi-fit base that allows quick and simple installation of the alarm, combined with simple removal and replacement. The Easi-fit base automatically connects both mains power and battery back-up as the alarm slides on to the base.

• The green indicator will illuminate to show mains power is present.
• When in alarm, the Ei261ENRC will send an interconnect signal to all other smoke, heat or CO alarms it is linked with (only the triggered alarm will flash a red indicator).
• The horn will sound and the red indicator will flash at different speeds in indicate the presence of various levels of CO gas
• The horn will beep every 40 seconds to indicate the battery back-up is depleted and needs recharging.
• The horn will beep and the amber indicator will flash every 40 seconds to indicate a fault on the sensor.
• The Test/Hush button will either silence false alarms (if briefly pressed) or perform a unit self test (if pressed and held). Note that the alarm cannot be silenced when sensing a CO level of 300ppm or above.
• Memory Feature after the unit has been in alarm, the red indicator will flash every 40 seconds at a rate indicating the CO level previously detected. Pressing the Test/Hush button will also cause the red indicator to flash at a rate specific to the previously sensed CO level.