My Cart

Items:  items
Value: 

Kidde Firex KF10 Mains Smoke Alarm

Kidde KF10 Ion Smoke Alarm 240/9V+alkaline Battery
Kidde Firex KF10 Mains Smoke Alarm with Battery Backup
KF10 ( replaces KF1 & 4870 ) Ionisation Smoke Alarm



Kidde   Firex  KF10 ( replaces KF1 & 4870 )  Ionisation Smoke AlarmKidde Firex KF10 Mains Smoke Alarm  - view 2
Kidde Firex KF10 Mains Smoke Alarm

Price:
11.64 Each
(9.70 Ex VAT at 20%)

CORONA VIRUS - Websparky is closed until further notice

Estimated delivery on this item from: 3.30
Final delivery charges are affected by quantities chosen and delivery service selected.
Estimated price above assumes "2nd class delivery" service selected.
 
 
MPN: KF10, KF1, 4870
Product Ref: SENKF10

Additional Information:
Kidde Firex KF10 ( replaces KF1 & 4870 ) Ionisation Smoke Alarm

Kidde KF10 Ionisation Smoke alarm 240/9V+alkaline battery ionisation smoke alarm230v with 9 volt battery backup included. 200mm flying leads included.

Power-On Indicator Continuous green LED showing mains power present
Alarm Electronic Piezoelectric sounder,
Alarm Sound Output 85dB (A) (minimum) at 3m
Alarm Frequency 3.2 kHz typical
Alarm Status Red LED flashes approximately once a minute showing normal operation
Red LED flashes once a second when sensing smoke (sounder alarm sounds)
RED LED flashes once every ten seconds to indicate in hush condition, auto reset after fifteen minutes
RED LED off another smoke alarm in an interconnected system has sensed smoke and is signalling an alarm
Normal Operating Temperature Range 0 to 40°C
Humidity Range Up to 93% Relative Humidity (RH)
Interconnect Up to 24 of these units can be interconnected:
KF1R, KF1, KF2R, KF2, KF3R, KF3
- 1SFW, 1SFWR, 2SFW, 2SFWR, 3SFW, 3SFWR
Interconnect Options Connectable as hard-wire interconnected system (up to 24 units as ‘interconnect‘ detail above) Note: Firex may be connected to
Kidde Fyrnetics Slick® alarms. See user manuals downloadable
from www.smoke-alarms.co.uk

Fixing Mounting bracketing supplied with two ‘T’ slot fitting option 57mm spacing to max of 90mm for standard screw fitttings on back boxes
Bracket has central access hole of 50mm diameter for cabling.
Can be mounting on solid surfaces using "Surface mounting base for smoke and Heat Alarms" (Sold Seperately)

Plastics used NORYL, Cover, main body and mounting bracket
Dimensions - 127mm diameter x 39mm depth (including mounting bracket)
Dimensions - (Mounting Bracket) 133mm diameter, 9mm max depth typical

The KF10 are mains powered (for professional installation) with back-up power, complying with current minimum requirements of the relevant Building
Regulations for new housing, i.e. Grade D (BS5839, Part 6).
Ionisation Smoke Alarms are for use where a fast flaming fire (for example, electrical equipment igniting) is more likely to be a hazard than a slow,
smouldering one, such as from furniture and bedding.

Technical Specification
Sensor - Ionisation, circularmetallic chamber with 24 slot entry inlet portals
Certification - BSi Kitemarked to BS EN 14604: 2005
Source Americium 241 (.1.0 microcurie, 37kBq)
Button Test - Simulates the effect of smoke within the sensing chamber, checks electronics and sounder
Automatic Self - Test Circuitry is tested and unit single beeps (chirps) if fault is detected
Supply Voltage - 230V AC, 50Hz (nominal UK Voltage)
Connection Push fit/snap in grip type connector with 150mm long flying leads (supplied)
Battery back-up (Model KF1) 1 off 9 Volt Alkaline Battery 522/6LR61
(User Replaceable)